在建筑工程当中经常会使用到C型钢，因此很多情况下等会准备相当量的C型钢材料放在工地现场或者是仓库以备使用，济南C型钢厂家提醒为了让这些材料在使用的时候能够保持好的状态正常的发挥效果，需要派专门的人员帮助存放和保管。具体来说，槽钢的保管储存要点包括以下几个方面。

C-section steel is often used in construction projects, so in many cases, a considerable amount of C-section steel materials will be prepared for use on site or in warehouses. Jinan C-section steel manufacturer reminds us that in order to keep these materials in good condition and normal effect when they are used, it is necessary to send special personnel to help us. Storage and storage. Specifically, the storage points of channel steel include the following aspects.

一、应选择适宜的场地和库房

1. Choose suitable sites and warehouses

由于槽钢遇到水或者是酸碱类的物质很可能会发生腐蚀的现象，所以为了避免这种情况的发生，C型钢厂家建议在库房的选择方面应该要尽可能的保持通风良好并且远离潮湿的地方所以周边的排水一定要顺畅，同时还要避免存放在具有有害气体或粉尘的环境当中。尽可能的放在封闭式的仓库当中并且要在晴天打开门窗雨天关闭，C型钢厂家还提醒保管钢材的场地或仓库应选择远离产生有害气体或粉尘的厂矿。

Because channel steel is likely to corrode when it encounters water or acid-base substances, in order to avoid this situation, the C-section steel manufacturer suggests that the selection of warehouses should be as well ventilated as possible and away from damp places, so the surrounding drainage must be smooth and storage should be avoided at the same time. In environments with harmful gases or dust. As far as possible in the closed warehouse and to open doors and windows on sunny days and close in rainy days, C-section steel manufacturers also remind the storage of steel sites or warehouses should choose to stay away from factories and mines that produce harmful gases or dust.

二、要合理堆码、先进先放

2. Reasonable stacking and putting in first

在储存槽钢建材的时候需要按照一定的规律和方法进行堆码，在堆好后也尽可能的要保持它的稳固以保证安全问题。并且C型钢厂家提醒为了防止不同的材料之间产生腐蚀或者是混淆，应该要按照品种、规格分别进行，对方不可以混在一起，而且是按照进入库房的先后顺序进行对方这样的话很方便取用。C型钢厂家还介绍如果是放在露天的槽钢材料，那么为了避免受潮，应该在底下先垫好木垫子并且保持一定的倾斜度以帮助排水使用，并且材料存放的时候一定要保持平直，高度应该在规定范围内不能过高以免影响安全。

When storing channel steel building materials, it is necessary to stack them in accordance with certain rules and methods. After stacking, it should be as stable as possible to ensure safety. And the C-section steel manufacturer reminds us that in order to prevent corrosion or confusion between different materials, it should be carried out separately according to varieties and specifications. The other side should not be confused, and it is very convenient to use the words according to the order of entering the warehouse. C-section steel manufacturer also introduced that if the channel steel material is placed in the open air, in order to avoid dampness, the wooden mattress should be padded under and keep a certain inclination to help drainage use, and the material must be kept straight when stored, and the height should not be too high in the prescribed range in order to avoid affecting safety.

三、保持仓库的清洁、加强材料的养护

3. Keeping the warehouse clean and strengthening the maintenance of materials

所有的槽钢材料在入库房之前应该尽可能的避免潮湿淋雨之类的情况，如果已经发生这种状况，那么C型钢厂家提醒要设法的将材料擦干净并使它保持在干燥清洁的状态，这样才能够避免其受腐蚀。C型钢厂家强调不仅如此而且还应该要主动的做好防锈的保养，在它的表面刷一层防锈的油并且每隔一段时间就检查一次。

All channel steel materials should avoid wet and rainy conditions as far as possible before entering the warehouse. If this situation has occurred, the C-section steel manufacturer reminds us to try to clean the material and keep it dry and clean so as to avoid its corrosion. The C-section steel manufacturer emphasizes not only that, but also that it should take the initiative to do a good job of rust-proof maintenance, brush a layer of rust-proof oil on its surface and check it every other time.

本文来自：济南C型钢，更多的内容请点击：http://www.jnhscg.com！我们将会为您提问的问题提供一个满意的服务，欢迎您的来电！

This article is from Jinan C-section steel. For more information, please click: http://www.jnhscg.com! We will provide you with a satisfactory service to ask questions. Welcome your call!