用户不同，对于C型钢壁的厚度要求也是不同的，如果要同时满足这些要求的话，所选用的C型钢生产工艺和设备非常关键。下面济南C型钢就给大家说一下将C型钢的壁厚控制的均匀合理的方法！

Different users have different thickness requirements for C-section steel wall. If these requirements are to be met at the same time, the production process and equipment of the selected C-section steel are very critical. Next, Jinan C-section steel will tell you how to control the wall thickness of C-section steel uniformly and reasonably!

材料从C型钢机的尾部进入之后，经过各种压辊的压制，然后从头部输出成型后的C型钢。这不仅使得必要的生产加工工艺得到了极大的优化，同时提高了生产下来，还能保证C型钢产品具有均匀的壁厚和复杂的界面形状。

After the material enters from the tail of the C-section steel machine, it is pressed by various rollers, and then the formed C-section steel is exported from the head. This not only greatly optimizes the necessary production and processing technology, but also improves the production. It also ensures that C-section steel products have uniform wall thickness and complex interface shape.

为了达到准确的壁厚，C型钢机在压制C型钢的时候，使用的模具是由一个精准的上模和一些大小规格尺寸相同的下模构成的。在加工之前将它们安装到位，不仅要保证上模与下模能够顺利的，还得确保四周边间隙均匀，这样压制的C型钢才能壁厚均匀。

In order to achieve accurate wall thickness, when pressing C-section steel, the die used by C-section steel machine is composed of a precise upper die and some lower dies of the same size and size. Installing them in place before processing not only ensures the smooth operation of upper and lower dies, but also ensures the uniform clearance around them, so that the wall thickness of pressed C-section steel can be uniform.

C型钢加工的时候，模具安装及主机试车，然后开启空气压缩机、真空泵、挤出机、切瓦机、放料机、压瓦机、主机及瓦托输送机；泊车时，先休止挤出机，再休止其余设备。

When C-section steel is processed, the die is installed and the main engine is tested. Then the air compressor, vacuum pump, extruder, tile cutter, feeder, tile press, main engine and tile conveyor are opened. When parking, the extruder is stopped first, and the rest of the equipment is stopped.

在设备使用前，要检查各处连接是否牢靠，安装螺栓、螺母是否拧紧，左右机箱内应加足润滑机油，才能通电启念头器进行试车。挤出机挤出的泥坯，经切割机切成定长，由滚子输送机送至压瓦机，由装料器按划定程序送至下模，C型钢机压出的瓦坯在工作台转位后，由卸瓦机的真空吸盘吸取并转位放置在输送线的瓦托上。

Before using the equipment, it is necessary to check whether the connections are reliable, whether the bolts and nuts are tightened, and lubricating oil should be added in the left and right chassis, in order to turn on the power to start the idealizer for test run. The mud blank extruded by extruder is cut into fixed length by cutting machine and sent to tile press by roller conveyor. The material loader is sent to the lower die according to the specified procedure. The tile blank extruded by C-section steel machine is absorbed by vacuum sucker of tile unloader and placed on the tile bracket of the conveyor line after the worktable is rotated.

C型钢机制造出的C型钢壁厚可以制得很薄，而且大大简化了出产工艺，进步出产效率。可以出产用一般热轧方法难以出产的壁厚平均但截面外形复杂的各种型材和不同材质的冷弯型彩钢设备。

The wall thickness of C-section steel produced by C-section steel machine can be very thin, and the production process is greatly simplified, and the production efficiency is improved. It can produce all kinds of profiles and cold-formed color steel equipment with complex cross-section shape and average wall thickness which are difficult to produce by common hot rolling method.

感谢您的阅读与观看，本文的精彩内容来自：济南C型钢，我们会有更多的精彩内容继续为您呈现，详情请点击：http://www.jnhscg.com

Thank you for your reading and watching. The wonderful content of this article comes from Jinan C-section steel. We will continue to present more wonderful contents for you. For more details, please click on http://www.jnhscg.com.