欢迎访问问庆凯彩钢您暂无新的询盘信息!

全国咨询热线

常见问题

当前位置:首页 - 新闻资讯 > 常见问题 >

在存放C型钢时至少注意五点

来源:http://www.jnhscg.com 日期:2022-11-08


济南c型钢是生活和工业中常用的钢材。具有长时间性好,使用寿命不错的优点。在使用C型钢时,也要注意保管,否则会损坏C型钢的使用寿命。所以在存放C型钢时,要注意以下几点:

Jinan c-section steel is commonly used in life and industry. The utility model has the advantages of good durability and good service life. When using C-shaped steel, pay attention to storage, otherwise the service life of C-shaped steel will be damaged. Therefore, the following points should be noted when storing C-shaped steel:

1、不同类型的C型钢需要分开堆放,以便于搬运、放置和管理。C型钢和其他钢材一样,经常用于建筑工程中,在使用前要经过加工。研讨发现,为确定C型钢的加工质量,C型钢的冲压和弯曲回弹是一个关键问题。

1. Different types of C-shaped steel need to be stacked separately for easy handling, placement and management. Like other steels, C-shaped steel is often used in construction projects and must be processed before use. It is found that in order to determine the processing quality of C beam, the stamping and bending springback of C beam is a key problem.

冷弯是C型钢加工过程中的一个重要工序,是C型钢成形的关键。虽然冷弯后需要对材料进行矫正,但C型钢经过一段时间的弯曲后会发生严重的变形。结果表明,C型钢存在大的内应力,使C型钢在弯曲后仍有大的回弹。

Cold bending is an important process in the processing of C beam, and is the key to the forming of C beam. Although the materials need to be corrected after cold bending, the C-beam will be seriously deformed after a period of bending. The results show that there is a large internal stress in the C beam, which makes the C beam still have a large rebound after bending.

2、露天堆放的C型钢应垫木垫或木条,堆放面应稍倾斜,以利排水。

2. The C-shaped steel stacked in the open air shall be padded with wood pads or battens, and the stacking surface shall be slightly inclined to facilitate drainage.

3、济南c型钢堆放的原则是堆放平稳,堆放高度不宜过高,以免造成型钢滑动的危险。

3. The principle of stacking C section steel in Jinan is to stack stably, and the stacking height should not be too high, so as to avoid the danger of sliding of formed steel.

4、存放C型钢的仓库需要清洁、干燥、通风。

4. The warehouse for storing C-shaped steel shall be clean, dry and ventilated.

5、酸、碱、盐、水泥等腐蚀性材料不能入库。

5. Corrosive materials such as acid, alkali, salt and cement cannot be warehoused.

20211231161498.jpg

C型钢的处理步骤如下:

The processing steps of C-shaped steel are as follows:

1、打孔和攻丝。在电缆的三个侧面打一个22.5毫米的孔,然后用M24*35螺栓攻丝制作M24螺纹扣。

1. Punching and tapping. Punch a 22.5mm hole on three sides of the cable, and then tap the M24 * 35 bolt to make M24 thread.

2、切割。25U电缆材料长460mm,29U电缆材料长480mm。

2. Cut. The 25U cable material is 460mm long, and the 29U cable material is 480mm long.

3、材料选择。16M或20M16X80钢板;

3. Material selection. 16M or 20M16X80 steel plate;

4、热轧。钢板加热到1000-1200摄氏度进行热轧。

4. Hot rolling. The steel plate is heated to 1000-1200 ℃ for hot rolling.

所以说在存放C型钢时至少注意五点,详细的内容就给您讲解完毕了。你有购买需求或者问题求助,都能来我们网站http://www.jnhscg.com咨询!

So at least five points should be paid attention to when storing C-shaped steel, and the detailed contents will be explained to you. You can come to our website for purchase needs or help http://www.jnhscg.com consulting service


上一篇:彩钢夹芯板与彩色压型钢板的区别用法
下一篇:最后一页

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】