So far, the use of color steel plates has brought important changes to our social life, which can be said to be a hero. Now Jinan Color Steel Plate Factory is mainly to introduce the construction conditions and construction methods of color steel plates to help you as a reference!
Construction conditions of color steel plate
The purification room does not use wood or other materials that do not meet the purification standards. All kinds of incoming materials shall be stored in a clean and dry place with enclosure facilities. The thickness, specification, size and quality of the color steel sheet shall meet the requirements of the design or the contract, and the factory inspection report shall be provided. The production of the color steel sheet shall be carried out according to the panel drawing and dimension quantity table of the secondary design. During the production process, the number of the drawing shall be followed, and the length of the ceiling plate shall not exceed 5000 mm.
Standard hardware and other auxiliary materials shall meet the design requirements or contract requirements and have factory certificate. The material and specification of the joint profile steel shall meet the design requirements, and there shall be quality assurance or inspection report. Mild steel is preferred. The material and specification of aluminum profile shall meet the design or contract requirements, and shall be provided with factory certificate. There are sufficient temporary storage places for materials and storage places for aluminum alloy processing semi-finished products.
1、 Partition waterproof structure
There are many wet processes in PCD process, and the solution used in the production process is corrosive, which will corrode the color steel tile and affect the service life of the color steel tile. Therefore, it is recommended that when designing the workshop partition under the color steel tile, another 80~100 mm high and 50 mm wide soil-built cement plate or special brick should be made under the color steel tile, and then the color steel tile should be made on it. If it is on the side of the purification workshop, the profile (large arc) specially designed and used by our company should be used, Ensure compliance with cleanliness requirements
2、 Anti-corrosion construction of color plate wall
The production process of pcd is wet and corrosive. The partition wall of this kind of workshop produces corrosion of color plates, which often have to be replaced after a short time. Our company has also done similar projects in the past. For workshops with corrosive substances, the conventional anti-corrosion treatment of color steel plate wall is: a. spray anti-corrosion cement on the wall; B. Apply anti-acid and alkali paint on the wall. (In this way, the service life of the color plate can be extended by 5-6 years, and the stone carving line is generally used for about 3 years, which can be replaced.)
The construction conditions and methods of color steel plate are explained here. If you have any doubts or needs about this, you can come to our website at any time http://www.jnhscg.com Consult and understand!