欢迎访问问庆凯彩钢您暂无新的询盘信息!

全国咨询热线

行业新闻

当前位置:首页 - 新闻资讯 > 行业新闻 >

怎么防止彩钢夹芯板生锈

来源:http://www.jnhscg.com 日期:2022-12-24

要怎么防止彩钢夹芯板生锈?下面济南彩钢夹芯板厂来说一下相关的内容!

How to prevent the color steel sandwich panel from rusting? Now let's talk about the relevant content of Jinan Color Steel Sandwich Panel Factory!

1、除锈清洗:使用设备打磨除锈,使彩钢夹芯板表面光洁、无焊渣、铁锈、毛刺,无灰尘、油脂、污垢、氧化物规模。如果严重的话,也可以用水冲洗,晒干或清洗后用设备烘干,使彩钢夹芯板表面发亮。

1. Derusting and cleaning: use equipment to polish and derust the color steel sandwich panel to make the surface smooth and clean, without welding slag, rust, burr, dust, grease, dirt and oxide scale. If it is serious, it can also be washed with water, dried in the sun or dried with equipment after cleaning to make the color steel sandwich panel surface shiny.

2、防腐涂层基层:原则上应在彩钢夹芯板除锈清洗后3小时内涂刷防腐底漆,并使用专用油漆和设备将防腐漆搅拌均匀后喷涂它均匀。挂起痕迹。然后进行人工检查,确保无死角,无毛刷漏水,棱角打磨光滑。施工队伍的服务质量有待检验。

2. Anticorrosive coating base course: In principle, anticorrosive primer shall be applied within 3 hours after rust removal and cleaning of color steel sandwich panel, and the anticorrosive paint shall be uniformly sprayed after being mixed with special paint and equipment. Hang traces. Then conduct manual inspection to ensure that there is no dead corner, no water leakage from the brush, and the edges and corners are polished smoothly. The service quality of the construction team needs to be inspected.

20210813117364.jpg

3、防腐面漆:防腐底漆与防腐底漆的时间间隔不得超过一小时。底漆表面应略干、均匀、无死角。喷涂浓度应由设备调节,使漆面薄而均匀。

3. Anti corrosion finish paint: the time interval between anti-corrosion primer and anti-corrosion primer shall not exceed one hour. The primer surface shall be slightly dry, uniform and free of dead corners. The spraying concentration shall be adjusted by the equipment to make the paint thin and uniform.

一旦发现彩钢夹芯板生锈,应及时处理,以免生锈变质,腐蚀品质。检查,定期维护和清洁,不仅可以防止生锈,还可以延长其使用寿命。

Once the color steel sandwich panel is found to be rusty, it shall be handled in time to avoid rust deterioration and corrosion of quality. Inspection, regular maintenance and cleaning can not only prevent rusting, but also extend its service life.

我们知道它已经暴露在风和阳光下很长时间了。面漆层老化后,上述空气中的氧气与基材直接接触,导致生锈。

We know it has been exposed to wind and sun for a long time. After the aging of the finish coat, the oxygen in the above air directly contacts the substrate, causing rust.

因此,翻新防腐施工实际上是通过喷漆将基材与空气隔离,使基材处于完全密封的环境中,使其无法与空气中的氧气发生反应,从而达到防腐的目的。更多相关内容就来我们网站http://www.jnhscg.com进行咨询吧!

Therefore, the renovation anti-corrosion construction is actually to isolate the base material from the air by painting, so that the base material is in a completely sealed environment, so that it cannot react with the oxygen in the air, so as to achieve the purpose of anti-corrosion. More relevant content will come to our website http://www.jnhscg.com Consult!


上一篇:彩钢板的檐口破损的原因
下一篇:最后一页

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】