The color steel sandwich board is made of rock wool as the sandwich layer, and its surface is coated with mortar, cement pressure plate, and chemical synthetic materials to improve its performance. The core board of the color steel sandwich rock wool sandwich panel manufacturer can suffer from moisture problems due to long usage time or being in a dark place for a long time. Therefore, in order to better display the value of the product, as a specialized manufacturer of Jinan color steel sandwich panel factory, it is necessary to do a good job in moistureproof measures.
Although moisture-proof color steel sandwich panels are used for building exterior walls, there are other materials besides basalt that are susceptible to moisture. Therefore, it is recommended not to use rock wool for construction during rainy days.
Although rock wool sandwich panels are thermal insulation materials, as national Grade A non combustible materials, they also have excessive loads. Therefore, the contact temperature of rock wool should not be too high. Once the rock wool is exposed to a temperature above 200 degrees Celsius, it must be protected externally. At the same time, during installation, it is necessary to strictly follow the installation standards, and the spacing of insulation nails should be around 400mm.
Install docking. When installing color steel sandwich panels, generally speaking, in order to achieve a small target of heat loss. During installation design, rock wool and felt must be tightly butted.
Only by doing this can we effectively prevent the moisture of color steel sandwich panels. If the product is temporarily stored and not used, our manufacturer must store it tightly. Rock wool sandwich panel manufacturers must remember not to place it in a dark and humid place or in a place exposed to the sun. For more relevant matters, please visit our website http://www.jnhscg.com Consult and understand!